Forbeauty
Laser Tattoo Removal Machine
What is Laser Tattoo Removal Machine?
The Laser Tattoo Removal Machine is a more commonly used tool for removing eyebrows. The main method is to remove the pigment on the eyebrow tattoo by means of a laser. The eyebrow tattoo is to bring the pigment to the deep and shallow layers of the skin in the eyebrow area, and the eyebrow washing machine refers to the use of laser energy to blast the shallow pigment. The deep color can be gradually moved to the shallow layer so that the position of the eyebrow can be gradually thinned after the pattern. After washing 3-5 times, the eyebrow area will be close to its original appearance.
Specification
Working Principle
The Laser Tattoo Removal Machine utilizes the blasting effect of laser light. The laser effectively penetrates the epidermis and can reach the pigment group in the dermis. Due to the extremely short action time of the laser (only a few nanoseconds) and the high energy, the pigment group expands rapidly after absorbing the high-energy laser in an instant and breaks into fine particles. These small particles are phagocytized by the macrophages in the body and excreted from the body. The pigment gradually fades and disappears, and finally achieves the purpose of treatment.
Operation skill &technique for every treatment
1. Treatment for tattoos on eyebrow
The customer should not open their eyes during treatment, the operator should adjust energy according to the depth of the tattoo color, hold the handle, and move it to the treatment area slowly to make the customer feel acceptable. the speed of the flash could be set to 3HZ, keep the head of the handle a two-finger distance from the treatment area, and start treatment from the head of the eyebrow to the end. treat again in 5-10 minutes if the color of the tattoo reappears.
2. Remove eye line (Notice: a little danger)
The speed of flashes could be set at 4~5 HZ, adjust the energy of light to minimum energy, and keep a one-finger distance between the head of the handle and the treatment area. The operator should strictly protect customers’ eyes with a panel for eyelids or a medical pledget (panel for eyelids)of 1cm depth.
Treatment should be started from down the eye line, the patient should deeply close their eyes and keep the eyeball up-sight inside. The operator should press the pledget(panel for eyelid) with the forefinger and push up the eyelid, peel down the eyelid with a middle finger to bare the eye line and treat it with flashes of 4-5Hz.
Then, treat up the eye line. The patient should close their eyes and keep eyeball down-sight inside. The operator should press the pledget(panel for eyelid) with the middle finger and push the eyelid down, push the eyelid up with the forefinger to bare the eye line, and treat it with flashes of 4-5Hz.
3. Remove the tattoo
The speed of flashes could be set to 3HZ/5HZ. It is better to use high energy for treatment until the treatment area seeps a little blood. It should have 45-90 days intervals to continue the next treatment until removed.
4. Remove the spot and naevus
The speed of the flash could be set to 3HZ/5HZ. Keep a 3-4 fingers distance between the head of the handle and the treatment area. It is better to use high energy for treatment until the treatment area seeps a little blood. It is advised to use a 1064 nm head for normal spot and nevus treatment, but for deep color spot and naevus, it is better to use a 532nm head for treatment. It should have a 15-30-day interval to continue the next treatment until removed.
